Bioreactor 300L

Model Number: SDT 8T-#3732 Brand Name: Sidolim Key Specifications/Special Features: SiDoLim in situ sterilizable fermentor (SDT 300L-1000L) system is a polite scale fermentor and designed for ease of useFermentor SDT 300L-1000LFermentor SDT (300L-1000L) is a large size pilot scale fermentation systems and the top driving mechanism is appliedHead plate lifting system by air cylinder and linear motion guide is adapted in standard specificationSystem can be used for microbial, insect and mammalian cell culturing proceduresStainless steel (SUS 316L) vessel and the whole attachments can be sterilized automatically or manually in this Pilot scale fermentation system and the whole fermentation procedures can be also performed automaticallyMeasured values of the procedures and monitored data are graphically displayed in the 8.5" color LCD screen and all the control parameters can be adjusted in the graphic mode

Agitation	Drive	DC motor, AC gear motor Top drive (mechanical seal driving)
	Range	50-1000 rpm
	Impellers	turbine impeller(SUS316L) foam breaker (SUS316L)
	Sensor	magnetic hall sensor
	Control	microprocessor based PID control
Materials and finish	Vessel	using 316L stainless steel it is polished mechanically and electrically
	Piping	316L stainless steel prevent contamination and is polished
	O-rings/gaskets	silicone material is used for the O-ring and the EPDM is used for gasket
Sterilization	built-in heater makers the in-situ sterilizing for the vessel, head plate, filter, aeration pipe lines and etc. in 105 ~130 temperature range automatically
Temperature	Range (°)	from 3°C above the cooling water temperature to 80°C (accuracy 0.1°C)
	Sensor	RTD (Pt-100)
	Control	built-in heater cartridge raises and cooling water pulling downs the water temperature and water pump circulates the water inside of the jacket
Aeration	Sparer	ring sparer (SUS 316L)
	Intel filter	cartridge type sterilizable pleated type 0.2μm absolute filter specifications (optional item)
	Out filter	same as internal filter specifications (optional item)
	Control range	different vessel size and/or ordered specifications
Pressure control	back pressure is controlled manually and/or automatically
Control unit	Panel	8.5" graphic color LCD, membrane keypad
	Communications	memory stick, printer, computer with the RS-232C communications protocol
	Controller board	microprocessor based integrated controller board is adopted to measure, control and display the fermentation system