Reciprocating GrateDelivery term:The date of payment from buyers deliver within days
- Total supply:
- Delivery term:
The date of payment from buyers deliver within days
- Validity to:
- Last update:
- Browse the number:
Material: Cr18, Cr20, Cr25, Cr26Ni1，1.4729（GX40CrSi13），1.4777（130CrSi29）, 4776（40CrSi29）, 1.4823（40CrNiSi27-4）.
Material standard：EN 10295:2002(E)
The production process: Lost Foam Process
Shell Mould Process
Lost wax process
The air-cooled reciprocating grate is structured like a staircase from fixed and moving grate bar series. In the reciprocating grate, every 2nd grate bar series is moved when the combustible is fed as against the overthrust grate. The burnt fuel via the slag hoppers at the lower end of the grate
The grate bar is an important part in the stove.A convenient grate bar shall include a frame and the grate itself.The frame is a cuboid with a square hole in the middle. The two ends of the cuboid are open with holes through which the furnace bar can pass.The grate bar is connected to the frame through the hole.The product is easy to install, easy to maintain, make the construction standardized, can greatly improve the work efficiency.The grate bar consists of a disk whose top surface receives the incinerated material and extends to the front and back ends to form a extension used as the supporting point of the grate.The grate bar also includes a longitudinal projection under the disk portion extending at least partially between the back end and front end.