Solvent Recycler

Product Introduction

A10Ex, specially designed solvent recycler for small amount of organic solvent recovery. Tilting-type and air-cooled condensing system, safe structure are manufactured by Chinese explosion-proof standard (CNEX: Ex d IIB T2 Gb, certificate No. CNEx16.2108X) and European standard (ATEX). After distilling and cooling for proximate 1.5 hours, clean organic solvents will be ready for reuse.
A10Ex solvent cleaning machine is suitable for small amount of organic solvent to recycle. It can handle 100L waste solvents by running 24 hours daily.

Product Photos

Detailed images

Technical data

Imput volume	10 L	Length	655 mm
Capacity of Tank	15 L	Width	505 mm
Capacity of heat transfer oil	5.5 L	Height	1050 mm
Power of heater	2.0 KW	Weight	62 KG
Power of fan	0.09 KW	Temp. of operation	50~190 °C
Max power	2.2 KW	Ideal room temp.	5~30 °C
Max current	9.5 A	Noise	around 65 db
Power supply	220V AC/50 HZ	Voltage of control unit	24V DC
Heating method	Indirect heating by heat transfer oil	Cycle time	around 1.5 Hours
Recovery rate	95%	Cooling system	Air-cooled
Solvent imput	Manual ( automatic imput unit is addable)	Material of case	Carbon steel with paint
Vacuum unit	None(option addable)	Material of tank	SUS304, double layers

NOTE: Values listed above are under ideal conditions in laboratory, just for your reference. The realistic data will be a little deviation due to the difference of waste content, boiling point of solvent, room temperature, viscosity etc.

Recoverable solvents list by solvent recycling equipment

8 benefits of solvent distillation machine

Main Features of solvent distillation unit

Packing and Delivery

Packing
1. Seaworthy standard wooden box.
Delivery
1. 5 days after payment if equipment in stock, or 30 days after payment if equipment customized.

Company profile

Certifications

Our clients

FAQ

1. Could you prove that you are a factory?

You could go through our website ‘www.solventrecyclingsystem.com’ to check our business registration and certificates.

2. Is there any consumables for your machines?

Yes, there are three consumables, thermal oil and seal-rings.

3. Can you build a machine without any information of your company?

Yes, we can build non-logo machines without any extra charges.

4. How long has you company been qualified by CE?

Our machines are in compliance with CE certificate for more than 20 years.

5. Could you specify T/T payment?

Usually 50% down payment and 50% balance payment before machine’s shipping.

http://www.solventrecyclingsystem.com/